Where is Sheathing in Buildings?, Places where Thermal Insulation is Necessary
Air leakage (intrusion) in buildings increases the need for additional heating in the winter and cooling in the summer, resulting in excessive energy costs. Leakage may occur through cracks in the building's walls, window and door openings, exhaust fans, ventilated fixtures and fixed air vents.
Reducing leakage and providing controlled ventilation to the building can save up to 20% on heating and air conditioning costs and significantly improve this. Thermal insulation of ceilings, ceilings, walls and floors in living spaces. The insulation volume must follow the climate zone in which the building is located or rise slightly, otherwise the position adjustment of the heating and air conditioning equipment will lead to excessive energy consumption and low comfort levels. We need to take precautions.
Thermal insulation reduces the thermal conductivity of the outer surfaces of the building. This reduces heat loss from the building in the winter, while reducing the heat in the summer, reducing the need for heating and air conditioning in the building. Good thermal insulation increases the building comfort level and can provide significant savings in energy costs .
In this article, where is sheathing done in buildings? , places where sheathing is done in the building, where should I have sheathing in the apartment? or how to make exterior cladding of buildings ? We will answer questions such as:
Places where sheathing should be done in buildings ;
- exterior facing walls
- Facing floors and walls in areas with no heat system, such as warehouses or garages
- sloping and flat roofs of the building
- All walls and floors in contact with the ground
- Insulation of ventilation ducts, installation pipes and similar equipment
- Dropped soles.
With the law enacted in 2000, sheathing application , which is obligatory for all new buildings to obtain licenses from building control companies, and which all old buildings are obliged to have until 2021 , in other words , thermal insulation . It is an insulation technique applied to the cold storage or the cold storage .
In buildings where thermal insulation is not applied correctly, due to the high amount of heat and energy loss, high bills, and the quality of life cannot be achieved, the facades and rebars, which are frequently exposed to health problems, external factors,is very vulnerable to damage. All buildings exterior cladding is considered mandatory by experts.
Exterior cladding has been made compulsory for all buildings with a law enacted in the year 2000.
The number of gaps in the insulation should be kept to a minimum and repaired whenever possible as additional heating and cooling is required. Professionals may require services that can be costly to check thermal insulation for gaps in inaccessible areas.
Therefore, during construction, it is necessary to check and, if necessary, repair the thermal insulation of the roof of the outer walls and directly repair the new structure or floor. Make sure that all purchased thermal insulation materials of the appropriate type are certified according to current regional standards.
Exterior insulation is required by law in schools, hospitals and all public buildings, as well as buildings used as residences. Houses that do not have sheathing done by not complying with the law enacted for the purpose of buildings today have sanctions such as not being able to take out real estate, not being able to rent, not being able to sell real estate, not being able to connect to natural gas and the same.
After being published in the official gazette, it is a legitimate requirement for all buildings to have energy identity cards, and these energy cards to be hung at the building entrances. How is thermal insulation done? We gave brief information. For extra information, refer to the article How to make thermal insulation? And what are the exterior cladding materials ? you can benefit.
Where are Exterior Cladding Needed?
Thermal insulation of buildings is a task that should be considered during the design phase. The wrong choice of construction and exterior cladding materials , regardless of climatic conditions, the thickness of the walls, the lack of waterproofing cause the walls to freeze, their cracking, which will affect the humidity and temperature levels in the house, as well as the service life of the house, the frequency of repairs.
Thermal insulation of the facade of buildings is necessary not only to create an additional layer that prevents transfer between the interior and the road, but also to protect the walls from rain.
Wet walls are easier to conduct heat. In addition, in cases where positive and negative temperatures change each other, moisture enters the pores on the wall surface, which begins to grow and expand inconspicuously in building materials.
Then these cracks will accumulate even more moisture, which will continue to widen the cracks and destroy the walls.
Where and How Should Exterior Cladding and Thermal Insulation of Buildings Be Done?
Currently, buildings, sites and apartments are warned as a result of the controls created by building control companies and authorized institutions. After 2021, sanctions will start to be applied for all new and old buildings. When the exterior sheathing program is made in TSE 25 standards, it provides 50% fuel savings.
The issue of building insulation is particularly relevant today. On the one hand, there are no big problems with the purchase of thermal insulation materials - the construction market offers many options. On the other hand, it is precisely this diversity that causes the problem - which insulation to choose?
Today, the problem of thermal insulation of modern buildings (especially urban new buildings) is particularly serious. Thermal insulation is the structural element that reduces the heat transfer performance of the material and the structure (unit) as a whole.
Exterior jacketing is also understood as a process that prevents the thermal energy of a building (thermal equipment, heating network, etc.) and buildings from mixing with the exterior structure. In other words, the insulating layer has the effect of a thermos.
Thermal insulation provides a comfortable indoor environment, keeps you warm in cold weather and prevents overheating on hot days.
Places to be Insulated in Buildings
However , in addition to the exterior thermal insulation application, coatings such as glass insulation, wall insulation, foundation insulation, roof insulation and door window jambs and floor mopping are also required. As a result of all these insulation works, savings can be achieved between 60% and 80% .
Exterior insulation is not only for energy saving, it also prolongs the life of buildings by providing protection of buildings from external effects, helping to create more durable, more resistant and durable structures.
How to make interior sheathing in another article ? in other words, how to make internal thermal insulation?, how to make internal jacketing? Together we will look for answers to your questions.
Metpor
info@metpordekor.com
Okunma Sayısı : 200